| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Delivery Time: | 2 Days |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic pump:
Model:PV15 2R1D C00 J343
General
The PV series pumps are variable displacement open circuit piston pumps with a design emphasis on operation economy. These axial piston pumps for open loop operation are suitable for rear drive in the PVT series configuration. The PV pumps have a displacement of 0.88 to 7.93 cu. in/rev. (14,4 to 130,0 cc/rev.) with a continuous working pressure up to 4000 psi (280 bar): The pumps can be equipped with a pressure compensator, ventable compensator, load sensing or power limit control.
Mounting
The PV pumps have been designed to operate in a wide range of applications in industries where high pressure and variable flow are required at competitive cost. These pumps are designed to operate in any position. The pump shaft must be in alignment with the shaft of the source driver and should be checked with a dial indicator. The mating pilot bore and coupling must be concentric. This concentricity is particularly important if the shaft is rigidly connected to the driven load without a flexible coupling.
Input Shaft Information
Splined:
The shafts will accept a maximum misalignment of 0.002 in. (0,06mm) total indicator reading when the pump is foot mounted and 0.001 in. (0,03 mm) when flange mounted. Angular misalignment at the male and female spline axis must be less than ±0,002 inch per inch radius (± 0,002 mm/mm). The coupling interface must be lubricated. The female coupling should be hardened to 27/34 Rc and must conform to SAE-J498c, class 5 flat root side fit.
Keyed:
High strength heat treated keys must be used. Replacement keys must be hardened to 27-34 Rc. The key corners must be chamfered 0.03 - 0.04 in. (0,75-1,0 mm) at 45° to clear radii that exist in the keyway.
Side Load Capability
The PV series is designed for inline-drive and side loading on the shaft is not recommended. If this is unavoidable consult your nearest DENISON HYDRAULICS representative.
Shanghai Sinu Marine Technology Co., Ltd, mainly provides deck hydraulic machinery for ship owners, shipping companies, shipping companies, automobile manufacturers, ship repair shops and other users, such as: Hydraulic motors, hydraulic pumps, hydraulic valves, pressure gauges, Hydraulic hoses, crane hydraulic spare parts, ship hatch cover hydraulic spare parts. Our company also provides overhaul, testing and maintenance services for hydraulic products such as hydraulic motors and hydraulic pumps.
COMPANY PROFILE
Our company in Shanghai, China. Workroom 1500 square meters.
We have 20 years experience of hydraulic spare parts. We repair and offer hydraulic spares parts (hydraulic motor/hydraulic pump/hydraulic valves/rubber hose/cylinder/ brake disk/crane parts/presure guage ect. )for vessel deck crane and other equipment.
Shanghai Sinu Marine Technology Co., Ltd, mainly provides deck hydraulic machinery for ship owners, shipping companies, shipping companies, automobile manufacturers, ship repair shops and other users, such as: Hydraulic motors, hydraulic pumps, hydraulic valves, pressure gauges, Hydraulic hoses, crane hydraulic spare parts, ship hatch cover hydraulic spare parts.Main products is T6C,T6EE,T7EEC/A10VSO/A4VG/A7V/6N67/HVL series ect.
Also, we offer repair service on board.
Welcome to contact us.
FAQ
1. who are we?
We are based in Shanghai, China, start from 2020,sell to Western Europe(50.00%),South Asia(10.00%),Northern Europe(10.00%),Mid East(10.00%),Eastern Asia(10.00%),Southern Europe(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
hydraulic motor,hydraulic pump,hydraulic vales,hydraulic cylinder,hydraulic spares,deck crane spares,rubber hose,ect.
4. why should you buy from us not from other suppliers?
We have 20 years experience of hydraulic spare parts. We repair and offer hydraulic spares parts (hydraulic motor/hydraulic pump/hydraulic valves/rubber hose/cylinder/ brake disk/crane parts/presure guage ect. )for vessel deck crane and other equipment.
5. what services can we provide?
Accepted Delivery Terms: EXW;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese
6.How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
7.Do you have any guarantee on the quality of your products?
As long as the pumps&motor&valves and all products are from Sinumarine, we promise that the minimum period quality assurance is one year. If the products have any problem on quality within this period, we all provide exchange service. If they have been installed, inconvenient to be exchanged, we will provide technical personnel to help solve the problem.
8.If we have a large quantity of goods, can you give us a discount?
We provide unified wholesale price to customers. No matter you buy one or hundreds of goods, we try our best to give you benefit, because we want to establish long-term cooperation relationship with you.
PACKING & DELIVERY:
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
){kind=link}